Complete Guide to Using the TaffOmicron F02 Thermometer

The TaffOmicron F02 thermometer is a non-contact (infrared) body temperature measuring device that is practical for use by babies, children, and adults.
With infrared sensor technology, this device can detect body temperature in just 1 second without having to touch the skin, making it a safe and hygienic choice for at home.

How to Use the TaffOmicron F02 Infrared Thermometer

Here are easy steps to use this thermometer correctly:

1. Turn on the device by pressing the Power button.
2. Point the sensor at the forehead at a distance of about 3–5 cm.
3. Make sure there is no sweat or hair covering the measurement area.
4. Press the Scan / Start button, and within 1 second the temperature result will appear on the screen.
5. Once finished, the thermometer will automatically turn off if not used for a few seconds.

Note: Use in a normal room temperature for more accurate results.

How to Change Temperature Units (°C ↔ °F) on the TaffOmicron F02 Thermometer

The TaffOmicron F02 Infrared Thermometer displays measurements in Celsius (°C) by default. However, some users are more familiar with Fahrenheit (°F), especially when following international measurement standards.

Here are the complete steps to change temperature units in the TaffOmicron F02:

Steps to Change Temperature Units:

1. Turn on the thermometer.
   Press the Power or Scan button to turn on the device until the LED screen lights up. Ensure the battery is properly installed.
2. Enter temperature setting mode.
   Press and hold the temperature button (°C/°F) or mode button for a few seconds until the temperature symbol on the display starts flashing.
3. Change temperature units.
   After the temperature symbol flashes, press the same button again to move from °C to °F, or vice versa.
4. If the display displays °C, it means the current temperature unit is Celsius.
5. If it changes to °F, then the units have changed to Fahrenheit.
6. Save settings.
   Release the button, and the thermometer will automatically store the new temperature units. After that, the device is ready to use with your chosen units.

Note: These changes will be saved until you change them again.

How to Set Up and Use Additional Modes

The TaffOmicron F02 Infrared Thermometer has two modes:

1. Body Mode: to measure human body temperature.
2. Surface Mode: to measure the temperature of objects such as baby milk or bottled water.

How to Change the Taffomicron F02 Infrared Thermometer Mode:

1. Press the MODE or SET button once.
2. Choose between Body or Surface on the screen.

With this feature, the device can be used to check the temperature of baby milk, bath water, and even room temperature.

Conclusion

The TaffOmicron F02 Infrared Thermometer is the perfect choice for modern families who prioritize speed, accuracy, and cleanliness.
By following the guide above, you can use and set the thermometer temperature easily in both °C and °F.